The smooth surface of racing tyres touches the road to improve traction on dry racing tracks. These tyres are highly effective in a racing environment. However, these tyres would not be able to help drivers who drive their vehicles in wet conditions. Therefore, it is not legal to use racing tyres on normal roads.

Normal Tyres Reading come with tread blocks, sipes and blocks. These elements of the tread pattern provide proper grip and traction to keep the vehicle stable on roads. If you observe a new set of tyres, they have proper tread depth that is essential to displace water in wet road conditions.

As you see, the tread depth of normal tyres is an essential part of your car tyres. Unfortunately, the tread depth of car tyres is not stable for a long time. Tyre Tread is made up of rubber. Therefore, tyres lose tread depth gradually because of several factors.

Rules and regulations of the UK do not favour bald tyres on roads. Therefore, drivers cannot drive their vehicles on roads if the tread depth is below 1.6mm. Since this is the minimum limit of tread depth, drivers may face legal punishment at any time because of their illegal act.

Legal matters apart, bald tyres are risky on roads because of several risk factors.

Because of these risk factors, you must not use your bald tyres on roads.

Before talking about these risk factors, we have to look at common reasons for bald tyres:

Heat and friction:

Degradation of tyre rubber takes place because of heat in tyres. As a known fact, rubber is sensitive to heat. Therefore, tyres usually lose their grip and traction because of the heat in the summer season.

When your tyres run on roads, friction and heat take place and promote the degradation of rubber in tyres.

Speed:

You must consider the speed of the vehicle while thinking about the health condition of your tyres. High speed of tyres will increase the severity level of heat and friction at the same time.

Condition of the road:

Certainly, uneven road surfaces will create more friction. Smooth and even roads also create friction and heat but this amount of heat is not troublesome for car drivers. Rubber grade will take place on a smooth road but at a slow rate.

Wrong air pressure:

Wrong air pressure is also responsible for uneven tread wear in tyres. If we talk about low air pressure, this issue affects both sides of the tread pattern because of a larger contact area. High air pressure, on the other hand, affects the tread rubber of the middle part.

Issues in wheel alignment:

Wheel alignment issues may take place at any moment because of daily driving conditions. Bumps, potholes and kerbs are enough to disturb the adjustment of suspension components. As a result, your tyres may struggle on roads just because of the wrong wheel alignment. If you ignore this condition for a long time, your tyres may start to wear unevenly.

You should note that the issue of tread wear is not repairable. It means changing tyres is essential for every driver after observing the signs of tread wear.

If you do not change your bald tyres, you may face the following effects:

Risk of hydroplaning:

Your car's bald tyres would not be as effective in wet conditions as they are with optimum tread depth. Your tyres need a rain-friendly tread pattern and proper tread depth to displace water efficiently on wet roads. In the condition of low tread depth, tyres would handle rainwater effectively and start to skid because of low traction.

Slush planning in snow conditions:

Slush planning is a similar issue that occurs in snow conditions. This is indeed a more dangerous phenomenon because of its possibility even at the comparatively slow speed of the vehicle. Therefore, you need a set of tyres that may displace slush effectively with the help of optimum tread pattern and tread depth. If tread depth is not at the optimum level, your tyres will struggle to make proper traction.

Poor grip and traction:

Not only on wet and snowy roads but your bald tyres would not provide better traction on dry roads as well. Because of poor gripping power, they stop your vehicle lazily as well. Moreover, you would not be able to turn or accelerate your vehicle well just because of the poor responsiveness of your bald tyres.

The threat of punctures and blowouts:

Bald tyres are more prone to punctures and blowouts. Iron nails and broken parts of vehicles may easily damage the rubber of your car tyres. Moreover, treads with low tread depth create more heat and traction while running on roads. In this case, they can experience a blowout or puncture at any time.

Wrapping up

You can surely slow down the rate of tread wear with the help of proper maintenance. Your tyres will serve your needs for several years if you save them heat, friction, sunlight, and other troublesome factors. However, tread wear will take place slowly in your tyres. You cannot stop this process. Therefore, smart drivers do not think much when they observe tread wear in their tyres. You can follow those drivers to change your bald tyres as soon as possible.